- This topic has 3 replies, 2 voices, and was last updated 13 years, 3 months ago by
.
-
Posts
-
Sometimes have a problem with sending pictures – I hope these show up OK.
I started this Spacer last Spring with hopes of flying it at the Nat’s. That didn’t work out, but I decided to finish it anyway for the CIA meet at Muncie in September. Built from a genuine set of California Model Co plans from the 50’s. Flew pretty good.
I/4 mil mylar on the wing and stab, tissue on wing upper leading edge. Colors on the tip are actually white, yellow and Day-Glo orange. Pink background for the graphics. Medallion on old Hiscott mount, homemade Tomy timer and remote pinch-off, bladder tank. Klass Kote from the pylon rear forward. 5.6 ounces out the door..Rudy in still balmy Cleveland
Somebody want to tell me what I’m doing wrong here ?? I go through the add attachment pages, but don’t get any pictures and no message to tell me what is wrong…..
RudyHello Rudy
I have built about (6) 1/2 A Spacers over the years. I was going to build a new one for the NATS, but ended up putting parts together from probably 3 of those 6 models. Flew pretty good at the NATS, but it did not level out on the last flight, and lost 1/2 of the altitude placing me in 3rd.
I am going to build one more.
Your pictures are not getting attached because they need to be under 100 K in size. About 2 3/4″ in size.
- You must be logged in to reply to this topic.