Props for McCoy .19

Home › Forums › Free Flight › Nostalgia Gas › Props for McCoy .19

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 08/04/2007 at 12:00 am #40677
    Roger LaPrelle
    Participant

    I have a great McCoy .19 that I want to use on a Texan for A NosGas. Can anyone recommend a good prop size to start with? I have a lot of Rev-Up 9/4 and 9/5 left. Also some Power Props and wood Tornados of the same size. Is this the a good place to start?

    Thanks, Roger

    08/04/2007 at 12:13 pm #44541
    Anonymous
    Inactive

    Hi Roger

    I would come down in diameter and pitch to something like an 8″ x 4″ or 8″ x 3.75″ (wood Rev-up or Zinger if you can find them).

    Ployd in OZ



    08/04/2007 at 1:50 pm #44542
    Roger LaPrelle
    Participant

    Thanks! I have a few of those left, also. Don’t know where I’ll ever get a prop like that again, though. 😥



    08/05/2007 at 8:01 am #44543
    gos
    Participant

    8×4 APC would be good. Or you could cut 1/2in off each side of a 9×4, balance it well, and give it a go.

    May save you buying new props. 🙂

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.