Removal Holland Hornet NVA

Home Forums Free Flight The Engine Shop Removal Holland Hornet NVA

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #40520

    I recieved a new .049 from a friend. It does not have the insert venturi. I have several extra cases that have the insert. Do these just push out? NVA Any special way of doing this? Don’t want to hurt little darlings.


    Yup, typically these are just pressed in place. Before you press it out, note the location of the hole in the spray bar. Also, come up with a method to support the casting before pressing it out. If you have a drill press, you can use that as a press….Just be careful and you should be successful!!

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.