Super Tigre G.15

Home Forums Free Flight The Engine Shop Super Tigre G.15

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #41048
    Steve Landy
    Participant

    Was the G.15 made in any other size than 2.5cc? If so, how do you tell them apart?

    #46944
    Anonymous
    Inactive

    The G15 was also made as the G15/19 (3.2cc)
    I believe a ’19’ was stamped into one of the mounting lugs.
    JB

    #46945
    Anonymous
    Inactive

    If I’m not mistaken, the G15 is a series number, not a size. There were also G20’s There is usually a size designation on the opisite side of the G15/G20 markings, and often on a small circular boss

    George

    #46946
    John Seymour
    Participant

    The G is indeed a series. Super Tigre made G series engines in a 1.0 cc G32 diesel, 1.5 cc G33 (plain bearing), G15, including rear rotor versions, G15/19 (some were marked with 19 stamped into left side lug and some had the 15 within the G ground off and stamped 19). Within the G series were some X designated engines, including the X11,the rear rotor X15 and the somewhat rare X.21 front intake engines. I’m sure there are others I’m not familiar with. 😀

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.