- This topic has 1 reply, 2 voices, and was last updated 15 years ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Just a thought…see attached use of a rib template I’ve worked with. I got
a little frustrated while cutting ribs and found they moved around on the
balsa as I was cutting.
I find they don’ slip if you leave the burr on one side after you have cut and filed them
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.